Mixed Stacks
214 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Hardware Compatibility
This section describes hardware compatibility issues.

Stacking

Tip:
Tip: It is recommended to put the C360 switches at the bottom or top of a mixed stack
for easier connection of cables.
You may use the same Octaplane cables for stacking all the switches. However, the stacking
modules are not interchangeable. Please refer to Tabl e 36 for information on which stacking
module to use.
1. You should use Stacking Modules version C/S:1.x or higher.
Table37: Stacking Module Compatibility
Switch Stacking Module
C360 X360STK (refer to Installing the
X360STK Stacking Moduleon
page 41 for further information)
G700 X330STK1
P333T-PWR X330STK1
P332G-ML X330STK-ML
P332GT-ML X330STK-ML