Canon GC-251 - page 71

CANON Digital Galvano Scanner System KP-1SM Series + GC-251

Users Manual 1.00

Parameter ID 15 Parameter

Name

High-speed Serial Communication

Offset

Data High-speed Serial Communication Offset (Unit: pulse)

Return Value 0: Parameter setting successful

1: Parameter setting unsuccessful

Explanation Set this parameter, when a center position of the high-speed serial communications

data is offset.

This is effective, when operating by high-speed serial communications.

0 is set usually.

E.g. Data = 100

High-speed serial communication data(16bit) 0x8000 = 100 encoder pulse position.

Command

/Parameter

Parameter ID 16 Parameter

Name

First Digital Notch Filter Central

Frequency

Data Central frequency of the first digital notch filter (Unit: Hz)

Return Value 0: Parameter setting successful

1: Parameter setting unsuccessful

Explanation This parameter is used to set the central frequency of the first digital notch filter.

Command

/Parameter

First Digital Notch Filter Q Value (Parameter ID = 17)

First Digital Notch Filter Depth (Parameter ID = 18)

Parameter ID 17 Parameter

Name First Digital Notch Filter Q Value

Data Q value of the first digital notch filter (Unit: ×100)

Return Value 0: Parameter setting successful

1: Parameter setting unsuccessful

Explanation This parameter is used to set the Q value of the first digital notch filter.

Set a value multiplied by 100.

Command

/Parameter

First Digital Notch Filter Central Frequency (Parameter ID = 16)

First Digital Notch Filter Depth (Parameter ID = 18)