Canon GC-251 - page 77

CANON Digital Galvano Scanner System KP-1SM Series + GC-251

Users Manual 1.00

Parameter ID 34 Parameter

Name Deceleration Time

Data Deceleration time (Unit: ms)

Return Value 0: Parameter setting successful

1: Parameter setting unsuccessful

Explanation This parameter is used to set the deceleration time for a stop by “Command ID = 9:

Forced Stop.”

Command

/Parameter

Forced Stop (Command ID = 9)

Parameter ID 36 Parameter

Name Out-position width

Data Out-position (Unit: pulse)

Return Value 0: Parameter setting successful

1: Parameter setting unsuccessful

Explanation An error is output if a difference from the target value exceeds the setting of this

parameter becoming static.

Setting 0 is invalid.

Command

/Parameter

Bit 13 “Current Saturation” becomes 1 in error read (Command ID = 15).

Parameter ID 40 Parameter

Name Feed-forward Gain

Data Feed-forward gain (Unit: none)

Return Value 0: Parameter setting successful

1: Parameter setting unsuccessful

Explanation This parameter is used to set the feed-forward gain. This is usually set at shipping.

Setting 0 disables feed-forward.

Command

/Parameter

Parameter ID 42 Parameter

Name Overshoot Control

Data Overshoot Control (Unit: none)

Return Value 0: Parameter setting successful

1: Parameter setting unsuccessful

Explanation This parameter is used to set pole rearrangement. This is usually set at shipping.

Setting 100 disables pole rearrangement.

Command

/Parameter