Canon GC-251 - page 83

CANON Digital Galvano Scanner System KP-1SM Series + GC-251

Users Manual 1.00

8.4. Writing Parameters into ROM

All parameters are written in the controller ROM. At activation, the parameters are automatically read

and set in the controller.

If parameters are modified, they should be written into ROM for activation with the same settings at the

next power-on.

Write modified parameters into ROM as follows:

GALILEO

Select the All Parameter tab.

Select an axis for parameter settings.

The current parameter values are displayed.

Press the Save to EEPROM button.

“Saving to EEPROM” is displayed.

Note: Some parameter settings may disable normal activation next time.

If this problem occurs, change the activation mode for no automatic homing to the origin and check the

set values. (See 6-1, “Setting Controller Activation Mode.”)