Canon HF S21, HF S20 manual About standbymodeand auto power off

2 When you wish to resume recording, open the LCD panel.

• The ON/OFF (CHG)indicator turns back green and the camcorder is ready to record.

• _ You can also pull out the viewfinder to start recording with the

LCD panel closed. Restore the viewfinder to its original position to set the camcorder to standby mode.

O IMPORTANT

•Do not disconnect the power source during standby mode (while the ON/OFF (CHG) indicator is lit in orange).

(_ NOTES

•The camcorder will not enter standby mode if the LCD panel is closed while the ACCESS indicator is on or flashing, while a menu is being dis- played, or while the viewfinder is pulled out (lll-i;_il only). The camcorder may also not enter standby mode if the LCD panel is closed while the double memory card slot cover is open or when the battery charge is too low. Check that the ON/OFF (CHG) indicator changes to orange.

•About standbymodeand auto power off:

-The camcorder will power off automatically if left in standby mode for 10 minutes. Press {Po_ERI to turn on the camcorder.

-You can select the length of time until shut-off or turn off the Quick

Start function altogether with the _ _} [Power Saving Mode] _} [Quick Start (Standby)] setting.

-The usual 5-minute auto power off setting of [Power Saving Mode] is not applicable while the camcorder is in standby mode.

•Changing the position of the mode switch while the camcorder is in

standby mode will reactivate the camcorder in the operating mode selected.

48 • Dual Shot Mode