Options(*Default | value | in | mode) | |
[_ | Dynamic]* | ( | mode only) Compensates for a higher | |
| degree of camcorder shake, such as when shooting while walk- | |||
| ing, and is more effective as the zoom approaches full wide | |||
| angle. |
|
|
|
[D | Standard], [D | On] | Compensates for a lower degree of | |
| camcorder shake, such as when shooting while remaining sta- | |||
| tionary, and is suitable for shooting | |||
| this setting when recording movies with the optional | |||
| verter or |
| ||
[_ | Off] Use this | setting | when the camcorder is mounted on a tri- | |
| pod. |
|
|
|
Powered IS
When shooting video, you can use Powered IS to make the image stabilization even more powerful. Powered IS is most effective when you are stationary and zooming n on far subjects using high zoom ratios (the more you approach the telephoto end). Holding the LCD panel with your left hand will add to the stability of the shot
Press and hold POWEREDIS as long as you want to activate Powered IS.
•_J appears in yellow, wme Powered IS is activated.
•YOU can cnan(
[POWEREDIS button ( ong press or
;oggle on/oft) with me _ @ [POWERED IS Button] setting.
(_) NOTES
•If the degree of camcorder shake is too high, the image stabilizer may not be able to fully compensate.
• Powered IS is not available in | mode. |
•For surveying and following shots, when you pan the camcorder from side to side or tilt it up and down, we recommend setting the IS mode to [_ Dynamic] or [_ Standard].
Video * 65
