(_ NOTES
•When the audio level meter reaches the red point (0 dB), the sound may be distorted.
•If the audio level is too high and the sound gets distorted, activate the
microphone attenuator with the _ _ [Microphone Attenuator[ set- ting (or [Surround Mic Attenuator[ when the optional
•We recommend using headphones to check the sound level while adjusting the audio recording level or when the microphone attenuator is activated.
•This function can also be assigned to the custom key/dial (CC189).
Using Headphones
Use headphones for playback or to check the audio level while record- ing. The headphones are connected to the AV OUT/O terminal, which is used for both the headphones and the audio/video output. Before connecting the headphones, follow the procedure below to change the function of the terminal from AV output to O (headphones) output.
Operating | modes: | _ | 1 |
* Headphones | can be used | also in | mode but the function of the terminal |
not be changed in this mode. Changethe setting in advancein one of the other operating modes.
h | [FuNCI]i | @} [MENU] @ _ | _} [AV/HeadPh0nes] | @} | |||||
_ | [Headph0nes] |
|
|
|
|
| |||
|
| close the menu: @ [X] |
|
|
| ||||
| _} | [2D] | _} | [Volume] _}Drag | Y0Ur finger | left and right | along | ||
| the | volurne | bar to | adjust | the | volume _} | [X] | .... | |
* Only when performing the | procedure | in | mode, |
|
| ||||
• | O | appears. |
|
|
|
|
|
| |
Video * 85
