Canon iR Series manual Starting Network ScanGear, Switch the scanner online, Start the application

3

Before Scanning

Starting Network ScanGear

Network ScanGear is started by accessing it from a TWAIN-compliant application as follows.

IMPORTANT

• If you are using Network ScanGear for the first time after installing it, the network scanner to be used must be selected with the ScanGear Tool. For details, see ‘Selecting the Network Scanner to be Used,’ on p.3-8.

• The Network ScanGear driver cannot be started at the same time as the ScanGear Tool. If the ScanGear Tool is running, close it.

1 Switch the scanner online.

For details, see ‘Switching the Scanner Online and Offline,’ on p.3-2.

2 Start the application.

3 In the application, select Network ScanGear as the scanner to be used.

In the application, choose the command that selects a scanner (for example, “Select Scanner”, or “Select Source”), then select Network ScanGear in the dialog box that appears.

After doing this operation once, there is no need to repeat it.

4 In the application, choose the command that starts scanning operation (for example, “Scan New” or “Acquire”).

The Network ScanGear Main Window appears. Individual items in this window are explained on the next page.

NOTE

•See the documentation provided with your application for commands and procedures used to select Network ScanGear and start scanning.

3-10Starting Network ScanGear