4

Scanning

Ensuring Scanned Originals are Correctly Oriented

To ensure that originals scanned from the feeder are correctly oriented on the computer screen, use automatic orientation detection or set the feeding direction of the originals in the feeder.

Follow the procedure below to make these settings in the Network ScanGear Main Window.

To Automatically Recognize the Orientation of the Original

In the Main sheet, select Auto-adjust Orientation. During scanning, the orientation of the original is detected automatically, and the scanned image is rotated if necessary, so that it appears upright on the computer screen.

To Set the Feeding Direction of the Originals

Follow the procedure below to set the feeding direction of originals.

1 In the Main sheet, click the Orientation button.

The Orientation dialog box appears.

2 Select the orientation of the originals to be loaded into the feeder for Feeding Direction. For 2-sided originals, set Book Opening to indicate the relation between the front and back sides of a 2-sided original.

3 When the settings are complete, click the OK button to close the dialog box.

4-6Scanning from the Feeder

Page 37
Image 37
Canon iR Series manual Ensuring Scanned Originals are Correctly Oriented, Main sheet, click the Orientation button