1312 Troubleshooting Chapter 13
REC’D IN MEMORY The unit received the fax in
memory because paper or
toner ran out, or a paper
jam occurred during
reception.
Load paper in the multipurpose tray
( p.215), replace the toner
cartridge ( p.126), or clear the
paper jam ( p.133).
SELECT POL REJCT #082 You attempted to poll a fax
machine with a subaddress,
but the other party has not
set a subaddress or their fax
machine does not support
polling with a subaddress.
Contact the other party to check their
settings. If their fax machine does not
support polling with a subaddress,
delete the subaddress you have
registered ( pp.63, 67, 99).
SUBADD TX REJECT #080 You attempted to send a
document with a
subaddress, but the other
party’s fax machine does
not support reception with
a subaddress.
Contact the other party to check their
settings. If their fax machine does not
support reception with a subaddress,
delete the subaddress you have
registered ( pp.63, 67).
TX/RX CANCELLED You pressed Stop to cancel
a transaction.
TX/RX NO. nnnn The number shown (nnnn)
is a unique identification
number assigned to the
document you are sending
or receiving.
This number appears in reports so you
can identify transactions. Write the
number down if you will need it later.
TX/RX NO. nnnn
SCANNING P.nnn
MEMORY FULL
(Three messages
toggle.)
The unit is sending a
document and its memory
is full.
The unit continues to send the
document as memory becomes
available.
Messsage Error Code Cause Action