713Sending FaxesChapter 7
Sending Faxes
Regular dialling:
Use the numeric buttons to enter the fax
number you want, then press OK.
You can only enter one fax number
this way.
Dialling with the directory:
Look up the other party’s name.
You can enter the fax numbers in any order.
If you enter a wrong destination, press C, then enter the correct destination.
You must enter the second destination within five seconds of entering the first one. All
subsequent destinations must be entered within 10 seconds. If you wait longer than
these times, the FAX automatically begins scanning the document for sending. If you
do not want the FAX to begin scanning automatically after a few seconds, disable the
TIME OUT
setting ( p.146).
To review the destinations entered, use or to scroll through the numbers.
3Press Start/Copy to begin scanning for sending, or wait a few seconds for the
FAX to begin scanning automatically.
The FAX will first send the document to the onetouch speed dialling
destinations, then the coded speed dialling destinations, and finally to the
destination dialled using regular dialling.
If you do not want the FAX to begin scanning automatically after a few
seconds, disable the
TIME OUT
setting ( p.146).
To cancel sending once dialling has started, press Stop then . Sending
to all destinations you specified in step 2 will be cancelled. (You cannot
cancel only one destination.)
If a number is busy, the FAX will continue sending to the other destinations and then
automatically redial the number that was busy.
If the FAX’s memory becomes full while scanning your document,
MEMORY FULL
will appear in the LCD. If this happens, remove the remainder of the document from
the ADF (you may need to open the operation panel to do so), then divide the
document into several sections and send each section separately.
TEL= 2 887 0166
Ex: