43Document HandlingChapter 4
Document Handling
Loading Documents
Follow this procedure to load documents in the ADF:
The document is now ready for scanning.
Problems With Multipage Documents
If you have trouble feeding multipage documents in the ADF, remove the stack and
tap it on a flat surface to even the edges. Then “slant” the stack so that its front edge
is bevelled, and insert the stack in the ADF.
1Adjust the document guides to the
width of the document.
2Gently insert the top of the document,
face down, in the ADF until you hear a
beep.
Tap multipage documents on a flat
surface to even the edges before
inserting them in the ADF.
For a multipage document, the pages are fed one by one from the bottom of the stack.
Wait until all pages of your document have been scanned before starting a new job.
To avoid feeding problems, make sure the document meets the document requirements
(p.42).