83Receiving FaxesChapter 8
Receiving Faxes
If
FAX ONLY MODE
does not appear in the LCD when you press Receive Mode,
follow this procedure to set this mode:
The FAX treats all incoming calls as fax calls. It receives faxes automatically and
disconnects any voice calls.
1Press Function.
2Press Data Registration.
3Press OK.
4Use or to select
RX SETTINGS
.
5Press OK.
6Use or to select
RX MODE
.
7Press OK.
8Use or to select
FAX ONLY MODE
.
9Press OK.
10 Press Stop to return to standby mode.
11 Confirm that FaxOnly is displayed in the
LCD.
If FaxOnly is not displayed, follow
steps 1 to 2 on page 82 to select
FAX
ONLY MODE
. After a few seconds, the
LCD returns to standby mode.
The FAX does not ring when it receives a fax call. If you want to be alerted when a
fax call is received, connect the optional handset or a telephone to the FAX, and
enable the
INCOMING RING
setting ( p. 147). You can also select the number of
rings before the FAX answers (
RING COUNT
, p.147).
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
FAX/TEL AUTO SW
Ex:
FAX ONLY MODE
INCOMING RING
15:00 FaxOnly
Ex:
15:00 FaxOnly
Ex: