715Sending FaxesChapter 7
Sending Faxes
7Enter up to 116 fax numbers you want to send
to using any of the following methods:
Onetouch speed dialling:
Press the onetouch speed dialling
button(s) you want.
Coded speed dialling:
Press Coded Dial, then use the numeric
buttons to enter the twodigit code you
want. Repeat for other codes.
Be sure to press Coded Dial before
each code.
Regular dialling:
Use the numeric buttons to enter the fax
number you want, then press OK.
You can only enter one fax number
this way.
Dialling with the directory
Look up the other party’s name.
If you enter the wrong destination, press C, then enter the correct destination.
When you have entered multiple fax numbers, use or to scroll through the
numbers to review the destinations.
8Press Start/Copy to begin scanning the
document into the FAX’s memory.
When the preset time is reached, the FAX
sends the document to the destination(s)
you specified in step 7.
You can register up to 20 different delayed sending operations.
If the FAX’s memory becomes full while scanning your document, MEMORY FULL
will appear in the LCD. If this happens, you will not be able to send the document at
a preset time. Remove the remainder of the document from the ADF (you may need
to open the operation panel to do so).
Since the FAX is multitasking, you can perform other tasks even when your FAX is
set for delayed sending.
TEL=905 795 1111
Ex:
01
Ex:
TEL=03 3758 2111
Ex:
TEL= 2 887 0166
Ex: