143Summary of SettingsChapter 14
Summary of Settings
Accessing the Menus
Follow this procedure to access the different menus:
1Press Function.
2Press Data Registration.
3Press OK.
4Use or to select the menu you want.
You can select from the following:
USER SETTINGS
(p.144)
REPORT SETTINGS
(p.145)
TX SETTINGS
(p.146)
RX SETTINGS
(p.147)
PRINTER SETTINGS
(p.148)
POLLING BOX
(p.149)
SYSTEM SETTINGS
( p. 1410)
5Press OK to access the settings under the
menu you selected.
6Refer to the appropriate table ( following pages) and use these guidelines to
select and register settings:
Use or to scroll through the settings.
To register a setting or access subsettings, press OK.
To return to a previous level, press Function then Data Registration.
For your settings to be registered, be sure to press OK after making
a selection or entering information.
If at any stage you wish to return to standby mode, press Stop.
If you pause for more than 60 seconds while accessing a menu, the
unit will automatically return to standby mode.
7When you are finished, press Stop to return to
standby mode.
DATA REGSTRATION
USER SETTINGS
ECM RX
Ex:
15:00 FaxOnly
Ex: