144 Summary of Settings Chapter 14

USER SETTINGS Menu
For details on accessing the settings below, see p.143.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting Description SubSettings
DATE & TIME Sets the current date and time ( p.36).
UNIT TELEPHONE # En ters the fax/telephone number you want to appear at the
top of each fax page you send ( p.36).
UNIT NAME Enters the name or company name you want to appear at
the top of each fax page you send ( p.36).
TX TERMINAL ID Enables/disables printing of the sender information
( p.35).
ON
OFF
TTI POSITION Selects whether the sender information is positioned
inside or outside the image area ( p.35).
OUTSIDE IMAGE
INSIDE IMAGE
TELEPHONE # MARK Selects the prefix for the unit number ( p. 35). FAX
TEL
SCAN CONTRAST Selects the scanning contrast ( p.73). STANDARD
DARKER
LIGHTER
OFFHOOK ALARM Enables/disables the off hook alarm that alerts you that
the handset is not seated properly in its cradle.
ON
OFF
VOLUME CONTROL Sets the volume of the FAX sounds.
CALLING VOLUME Selects the ring volume when the FAX detects a voice
call.
1/2/3
KEYPAD VOLUME Selects the keypad touch beep volume. 0 (off)/1/2/3
ALARM VOLUME Selects the error alarm volume. 0 (off)/1/2/3
LINE MONITOR VOL Selects the line monitor volume (sound during dialling). 0 (off)/1/2/3
RX CALL LEVEL Selects the ring type for incoming calls. HIGH
STANDARD
TEL LINE TYPE Selects the telephone line type setting for your FAX
( p.38).
TOUCH TONE
ROTARY PULSE
R-KEY SETTING Enables dialling through a switchboard.
If you select PBX, you can select additional subsettings
( p.39).
PSTN
PBX