216 Setting Up Chapter 2
Follow this procedure to load a stack (maximum 10 mm stack height) of A4size plain
paper in the multipurpose tray:
Your FAX is now ready to print.
Testing the FAX
Once you have assembled the FAX, installed the toner cartridge, and loaded paper,
you can make sure the FAX is printing properly by making several copies of a
document ( p.102). If you have problems i n printing, see Chapter 13.
1Remove the multipurpose tray cover
from the FAX. Prepare a stack of paper
by tapping it on a flat surface to even its
edges.
2Open the paper guides to the
approximate width of the stack.
3Insert the stack into the multipurpose
tray ~ (print side facing you and top
edge first), then adjust the paper guides
to the width of the paper Ä.
Make sure there are no gaps
between the paper guides and the
paper stack.
4Replace the multipurpose tray cover.
Be sure to replace this cover to prevent dust accumulating inside the unit.
5Adjust the paper delivery selector if necessary ( p.54).
1
2
2