610 Speed Dialling Chapter 6
■If you selected
PSWD/SUBADDRESS
in step 17:
The other party’s fax machine may require an ITUT standard subaddress and/or
password to receive faxes. The subaddress/password you register here must match
exactly the one(s) registered on the other party’s fax machine. Contact the other party
to check their settings.
When sending with a subaddress/password, the other party’s fax machine receives
the fax only if your subaddress/password matches theirs. Their fax machine then
handles the received fax according to the feature they are using.
You also need to register a subaddress/password when polling a fax machine that
requires these settings ( p.99).
Continue with the steps below to register a subaddress/password:
18 Press OK twice.
19 If a subaddress is required, use the numeric
buttons to enter it.
• If a subaddress is not required, ignore this
step.
• If you have already registered a subaddress
that you want to keep, ignore this step.
20 Press OK twice.
21 If a password is required, use the numeric
buttons to enter it.
• If a password is not required, ignore this
step.
• If you have already registered a password
that you want to keep, ignore this step.
22 Press OK.
23 To continue registering other coded speed
dialling codes, repeat the procedure from
step7.
or
Press Stop to return to standby mode.
To check your entries, you can print a list of all the numbers and names registered for coded
speed dialling ( p.617). You may want to keep this list near your FAX to refer to it
when dialling.
SUBADDRESS
1234
Ex:
PASSWORD
4321
Ex:
02=
Ex:
15:00 FaxOnly
Ex: