Replacing an Ink Tank, Remove the ink tank | Canon LR1 guide

Replacing an Ink Tank

Make sure the LR1 is turned on.

Do not turn off or unplug the printer while replacing an ink tank. Doing so may cause damage to the BJ cartridge.

Press the access cover release button and open the BJ cartridge access cover.

The BJ cartridge automatically moves to the center.

BJ cartridge access cover

Do not touch this cable

➜

Remove the ink tank.

■Do not remove the green print head unit when replacing ink tanks.

■When disposing of used ink tanks, follow local regulations for disposal.

For the BC-11e Color BJ Cartridge

■Black ink tank — Raise the gray tab by lifting it with your finger.

BCI-11 Black

BCI-18 Black (high capacity tank)

2-8	Using BJ Cartridges Chapter 2

Image 29

Canon LR1 user manual Replacing an Ink Tank, Remove the ink tank, For the BC-11e Color BJ Cartridge

Contents

LR1 Page Trademarks CopyrightDisclaimer Quick Start Guide Using Your DocumentationQuick Guide to Printing User’s Manual this guide Conventions Contents FCC-1 Introduction Do not place the printer on thick rugs or carpets Important Notes on SafetyChoosing a Place for Your Printer Supplying Power to the Printer Printer is designed for use with AC 120 Do not use the power cord if it is tied or knotted Do not disassemble or alter the printer in any way Handling the PrinterDo not use items such as flammable sprays near the printer Do not drop or shake BJ cartridges Maintaining the PrinterHandling the BJ Cartridge BJ Cartridges Supplies and AccessoriesPaper BC-10 Black BJ Cartridge Ink Tanks BC-11e Color BJ CartridgeBC-12e Photo BJ Cartridge Ink Cartridge Storage Box Front View Names and Functions of the Printer’s Parts Control Panel Back View Turning On the Power Turning the Power On and OffAuto power on/off function Confirm that the connected Internet device is turned off Press the printer’s Power button Turning the Power Off Getting Help From Canon Servicing the Printer You can use the following BJ cartridges with the LR1 Using BJ Cartridges Make sure paper is loaded in the paper supply tray If Printing Is Unclear or Colors Are MissingPrinting the Nozzle Check Pattern Normal Nozzle Check Pattern looks like this Normal Print Head Cleaning Cleaning the Print HeadMake sure the printer is turned on Print a Nozzle Check Pattern see Deep Print Head Cleaning Replacing Ink Tanks Ink Type and Ink Replacement Important Notes For the BC-11e Color BJ Cartridge Replacing an Ink TankRemove the ink tank Replacing an Ink Tank For the BC-12e Photo BJ Cartridge For the BC-10 Black BJ Cartridge Install the new ink tank Color ink tank Press the ink light reset button Replacing the BJ Cartridge Close the BJ cartridge access cover Release and raise the green tab with your finger Remove the BJ cartridge Install the BJ cartridge Prepare the replacement BJ cartridge Close the BJ cartridge access cover Using BJ Cartridges Chapter Plain Paper High Resolution PaperPaper Handling Important Notes on Paper Loading the Paper Supply Tray Loading PaperPull the paper supply tray all the way out Fan the paper to be loaded and align the four corners Push the tray all the way into the printer Set the paper guide and size guide Insert the paper Loading Single Sheets in the Manual Feed Slot Open the back cover Using High Resolution PaperAlign the paper guide with the left edge of the paper Pull out the paper supply tray Close the back cover and press the RESUME/CLEAN button again Clearing Paper Jams Maintaining the Printer Printer Maintenance Cleaning the Printer Transporting the Printer Turn off the power to the Internet device and the printer Maintaining the Printer Chapter Power TroubleshootingPower does not go on Light above the Power button comes on Troubleshooting Chapter LOW INK light comes on Paper Trouble When PrintingPaper is jammed Paper does not feed properly Before loading? Was the paper fannedIs too much paper Loaded? Back side of the paper is soiled Paper Trouble After PrintingPrinted side of the paper is soiled Paper curls after printing If the printer does not print or stops during printing Trouble When Printing Printing starts, but stops before it is finished Printer is printing garbage Is the paper too thick? Is the paper bent or curled? Printing is unclearPrinting has a scratched appearance Ink bleeds White lines appear From the BJ cartridge? Colors are wrongIs ink flowing properly Correctly installed? Cartridge does not move into the replacement positionIs the power on? Lines do not print straight Troubleshooting Chapter Specifications Paper Size Recommended Printing Area area Specifications Appendix a Automatic feed Glossary RAM Index Index USB Color Bubble Jet Printer, Model K10191 FCC RegulationsCanadian Radio Interference Regulations