100 Chapter 11

Routine Maintenance
(2) Remove the orange protective cap (D) from the bottom of the ink tank and discard it.
Carefully hold the protective cap when removing it to prevent the ink from staining your
fingers.
Discard the cap once it is removed.
5Install the ink tank.
(1) Install the ink tank into the Print Head.
(2) Press on the mark on the ink tank until the ink tank snaps firmly into place.
(3) Ensure that the ink tank clicks into place and then its lamp lights red (B).
Important zBe sure to remove the clear film from the ink tank in the exact order
shown in step 5, as failure to follow this step may cause the ink to leak
and stain your clothes and hands.
zDo not touch the electrical contacts (G). Doing so can cause the
machine to malfunction or become unable to print.
zDo not squeeze the side of ink tanks (F) as this may cause the ink to
leak out and stain your clothes and hands.
zDo not re-attach the protective cap (D) once you have removed it.
zDo not touch the open ink port (E) once the protective cap is removed,
as this may prevent the ink from being ejected properly.
zInk on the removed protective cap may stain your clothes and hands.
zEnsure that all the orange tape has been peeled off along the
perforation. If there remains a part of the orange tape, ink may not be
ejected correctly.
Note Refer to the guide label (A) and insert the ink tank in the correct position.
(F)(E)
(B)
(D)
(A)
(G)
(C)
(B)
(A)