18 Chapter 1

Before Printing
Loading Documents to Copy or Scan
This section describes how to load the document on the Platen Glass.

Document Requirements

The documents you load on the Platen Glass for copying or scanning must meet these
requirements:

Loading Documents

Load documents that you want to copy or scan on the Platen Glass. For how to load a photo,
see“Scanning a Photo” on page 61. For how to load a film, see “Scanning a Film” on page 62.
1Lift the Document Cover.
2Load your document on the Platen Glass.
zPlace your document face down on the Platen Glass.
zAlign the upper left corner of your document with the alignment mark on the upper left
corner of the Platen Glass.
Document
type
zDocuments
zPhotographs
zBook
* For details on positive and negative 35 mm film strip and 35 mm slides, see “Photo
Printing from Photo or Film” on page61.
Size (W x L) Max. 8.5" x 11.7" / 216 x 297 mm
Thickness Max. 0.8" / 20 mm
Note Make sure any glue, ink, correction fluid, or the like is completely dry
before loading the document on the Platen Glass.