Chapter 8 89

Scanning Images
For detailed operations of the MP Navigator, refer to the Scan Guide.

Scanning Using the Operation Panel of the Machine

You can scan documents to your computer by using the Operation Panel on the machine.

zIf you are using Windows XP

The program selection screen is displayed the first time you press [Color] or [Black] on the
machine. Specify [MP Navigator Ver2.0] as the application software to use, check [Always
use this program for this action], then click [OK]. From the next time, MP Navigator is
automatically started.

zWhen using Mac OS X

For the machine to start scanning when [Color] or [Black] is pressed, you need to set MP
Navigator as the starting application software in Image Capture under [Applications] of Mac
OS X.
If you are using Mac OS X v.10.3.x
Select [Applications] from the [Go] menu, then double click [Image Capture]. Click
[Options] at lower left of the scanner window, select [MP Navigator 2.0] from [Application to
launch when scanner button is pressed], then click [OK].
If you are using Mac OS X v.10.2.4 or later
Select [Applications] from the [Go] menu, then double click [Image Capture]. Select
[Preferences] from the [Image Capture] menu. Select [Others] from [When a scanner
button is pressed, open], select [MP Navigator 2] from [Applications], then click [Open].
1Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page17.
2Load the document on the Platen Glass.
For details on how to load documents, see “Loading Documents” on page18.
For details on setting film originals, see “Scanning a Film” on page62.
Important Do not insert or remove USB cables when scanning images with the
machine connected to a computer, or when the computer is at sleep or
standby mode.
Important zIf you are using Mac OS X v.10.4, the settings below are not
necessary.
zMake sure that the MP Navigator is installed and that the Macintosh is
connected to the machine before starting up Image Capture.
Important If you select [Preferences] from the [Image Capture] menu, click
[Scanner], and mark [Use TWAIN software whenever possible], [Options]
is not displayed. In this case, click [Use TWAIN software whenever
possible] to uncheck the option, exit the Image Capture, then start it
again.