Canon MP950 Other Settings, Language selection, Reset setting, Save settings, Load settings

Chapter 10 95
Changing the Machine Settings
Other Settings
Date display
Changes the display order for shooting dates to be printed.
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Power save setting
Specifies the time until Power saving is enabled.
You can select from <5 minutes>, <15 minutes>, <1 hour> or <8 hours>. The initial value is set
to <1 hour>.
Slide show setting
Specifies the image display quality of the slide show.
Language selection
Changes the language for LCD messages.
Reset setting
You can change the settings back to the default, except for the language for LCD messages and the
position of the Print Head.
Save settings
Saves the settings for the Settings screen.
Load settings
Loads the settings for the Settings screen that were saved.
Note zWhen <Print date only> or <Print date & file no.> is selected for <Date/
file no.> in the tab 1 on the Settings (Memory Card) screen, the
shooting date is printed in the date display order you selected. For
Print settings, see “To Change Print Settings” on page34.
zThe shooting date format is as specified in the DPOF setting from
DPOF printing.
Important If you set this setting to <Read/write mode>, card direct printing cannot be
done. After you finish operation of the memory card dedicated drive, be
sure to revert this setting to <Read-only mode>.
Note When <Image quality: Std> is selected, images are displayed at 5-second
intervals. When <Image quality: High> is selected, images are displayed
at different time intervals according to their resolutions.