Chapter 5 77

Printing Photographs Directly from a Compliant Device
You may not be able to purchase some Canon branded paper depending on your country.

Printing Directly from a Digital Camera or a Digital Video Camcorder

This section describes how to print after connecting a camera to the machine.
1Display the image you want to print in replay mode.
zIf the camera will not change to replay mode, refer to the manual supplied with your digital
camera for instructions how to.
zWhen the digital camera is correctly connected, the icon will display on the LCD of the
digital camera.
2Press [SET] on the digital camera.
The print setting menu is displayed on the LCD of the digital camera.
3Select [Style] and specify the page size, bordered or borderless printing, and date

printing ON or OFF.

4Specify the number of copies, select [Print], and then press [SET] on the digital

camera.

Note zFor the digital camera operation method and troubleshooting, refer to
your digital camera manual.
zFor print error messages, see “Cannot Print Properly from the Digital
Camera” on page130.
Note zBy operating the digital camera, you can make the following prints:
– You can make a standard print from the image displayed in the single
display mode or in the index display mode.
– You can print specified numbers of images, or make an index print
by editing the DPOF.
* Images other than Exif may not be index printed.
– For the images ta ken with an ExifPrint compatible digital camera, the
ExifPrint function can be used.
– If date printing is set from the digital camera, the date when the
photograph was taken is to be printed (excluding the index print).
– Images will be scaled automatically according to the image size set
on the digital camera and the size of the media set on the machine.
zThe digital camera does not support the following functions:
– Print quality setting
– Machine maintenance
zTo disconnect the USB cable connecting the digital camera to the
machine, follow the procedure below:
1. Disconnect the USB cable from the machine.
2. Turn OFF the digital camera.
3. Disconnect the USB cable from the digital camera.
When disconnecting the USB cable, be sure to hold the connector
by its sides.