26 Chapter 1

Before Printing

zLoading Envelopes

Use either European DL or US Comm. Env. #10 size envelopes.
The address is rotated automatically to match the direction of the envelope when printing.
1Load the envelope against the Cover Guide on the right side of the Paper Support
with the print side facing UP, and the rear flaps DOWN on the left.
2Pinch the Paper Guide and slide it against the left side of the envelope.
3Press [Feed Switch] so that the Auto Sheet Feeder Lamp lights.
4Select [Envelope] in [Media Type], and then select [DL Env.] or [Comm. Env. #10] in
[Page Size].
For information on the printer driver settings, refer to the Printer Driver Guide.
Important zEnvelopes can be used only when printing from a computer.
zDo not use envelopes with embossed or treated surfaces, a double
flap, pressure seals or sticker flaps.
zSelect either [DL Env.] or [Comm. Env. #10] according to the envelope
size you are using.
zThe printed image will be upside down depending on the application. If
this occurs, open the printer properties dialog box then select the
[Rotate 180 degrees] check box on the [Page Setup] tab.
For information on the printer driver settings, refer to the Printer Driver
Guide.
Important Ensure that the Cover Guide stands when you load paper in the Auto
Sheet Feeder.
Note A maximum of 10 envelopes can be loaded at once.
Note zFold the envelope flap shut (A).
zPrinting direction (B).
2
1
3
(B)
(A)