Chapter 1 23
Before Printing
(A) If the Auto Sheet Feeder runs out of paper, the paper source automatically changes to the
Cassette.
Changing the Paper Source
Before printing, confirm that the location where you have loaded paper is selected as a paper
source. Press [Feed Switch] to change the paper source.
(A) Auto Sheet Feeder Lamp
(B) [Feed Switch]
(C) Cassette Lamp
Note zFor information on page size, media type, and paper support load limit
for Auto Sheet Feeder or Cassette, see “Recommended Paper and
Requirements” on page19.
zFor information on the printer driver settings, refer to the Printer Driver
Guide.
Note zPress [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when
feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit
when feeding paper from the Cassette.
zYou can also select the paper source with the printer driver when
printing from the computer. For details, refer to the Printer Driver
Guide.
(A)
(A)
(B)
(C)