Chapter 1 25

Before Printing
3Load the paper.
(1) Load the paper into the Auto Sheet Feeder with the print side facing UP.
(2) Align the paper stack against the Cover Guide on the right side of the Paper Support.
(3) Pinch the Paper Guide and slide it against the left side of the paper stack.
Important Ensure that the Cover Guide stands when you load paper in the Auto
Sheet Feeder.
Important Do not load the paper beyond this Load Limit Mark (A).
Note zYou can use general copy paper or Canon’s Super White Paper SW-
201.
zYou can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm
or 0.52 inches in height) in the Auto Sheet Feeder. However, the paper
may not be fed normally depending on its media type or your
environment where the temperature and humidity are high or low. In
that case, reduce the amount of paper to half (approx. 0.2" / 5 mm in
height).
zRemove the printed sheets from the Paper Output Tray before the
count reaches 50.
zDo not touch the printed surfaces until the ink dries. For specific drying
times, refer to the instructions packaged with your media.
(3)
(2)
(A)
(1)