Chapter 4 67

Photo Printing from Photo or Film
6Slowly close the Document Cover and press [OK].
The film is scanned.
Printing Photographs
Let's select a scanned photo and specify the number of prints, and print it.

Printing Photo Displayed on the LCD (Single-photo print)

Print a scanned photo.
1Prepare for printing.
(1) Load paper.
See“Loading Paper” on page 19.
(2) Ensure that the proper paper source is selected.
See“Changing the Paper Source” on page 23.
(3) Scan a photo or a film.
See“Scanning a Photo” on page 61 or “Scanning a Film” on page 62.
2Select the print menu.
(1) Use [ ] or [ ] to select <Single-photo print>, then press [OK].
The photo selection screen is displayed.
Note zThe photo or film is rescanned before printing starts. Do not open the
Document Cover or remove the photo or film from the Platen Glass
until printing is complete.
zIf the film was not scanned properly, see “Cannot Scan Films” on
page118.
zPress [PHOTO/FILM] when loading another film. If <Do you want to
clear the scanned photo?> appears on the LCD, select <Yes>, press
[OK] to delete the previous image data, then go to main step 2.
Note Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when
feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit
when feeding paper from the Cassette.
(2)