„To Save Energy

This machine has the following two modes that allow you to save energy.

zScreen-saver Mode

The LCD goes out if the machine is not operated for about five minutes*. * You cannot change the wait time before the LCD goes out.

Note

When you want to restore the display, perform a print operation or press any button except for the ON/OFF button. When you press the ON/OFF button while the machine is in Screen-saver mode, the machine turns off.

zPower Save Mode

The machine enters the Power save mode if not operated for a certain time interval*. In the Power save mode, the FAU lamp is turned off to reduce the power consumption of the machine.

*You can set the wait time before the FAU lamp is turned off. Select from 5 minutes, 15 minutes, 1 hour, and 4 hours. The default setting is 15 minutes. For details, refer to “Other Settings” in “Changing the Machine Settings” of the User’s Guide on-screen manual.

The FAU lamp is turned off, if no operation is performed for the time interval set in the Power save mode while the FAU lamp is on. If you scan films frequently, it is recommended to set the longer time interval (1 hour or 4 hours).

Note

Press any button except for the ON/OFF button or perform a copy or scan operation to restore the machine.

6Before Using the Machine