Note
To attach the Film Strip Frame on the Film Guide after scanning slides is complete
(1) Align the circle marks (z) on the Film Strip Frame with the circle marks (z) on the Film Guide, and insert the tabs on the tip of the Film Strip Frame into the Film Guide.
(2) Squeeze the edges of the Film Holder inward lightly and close it completely.
Make sure that all the protrusions on the outer edges of the Film Holder fit into the slots in the Film Guide when closing the Film Holder. If the Film Holder does not close completely, press the whole Film Holder gently downward.
6 Gently close the Document Cover and press the Color button.
Important
Do not stare at the light directly for an extended period of time when scanning films.
Printing Scanned Photographs
1 Prepare for printing.
(1)Scan a photo or a film.
See “Scanning a Photo” on page 35 or “Scanning a Film” on page 35.
(2)Load paper.
See “Loading Printing Paper” on page 9.
2 Select the print menu.
(1)Make sure that Select and print is selected, then press the OK button.
(2)Confirm the paper source, page size, media type, and other settings. To change the settings, select the item and press the OK button.
(3)Select Next, and then press the OK button.
3 Select the photo to print and specify the number of copies for each photo.
(1)Use the
(2)Press the [+] or
(3)Repeat steps (1) and (2) to specify the number of copies for each photo.
(4)Press the OK button.
38Photo Printing from Printed Photo or Film