An Error Message Is Displayed on the LCD
If an error message is displayed on the LCD, take the corresponding action described below.
Message | Action | |
“There are no photos in memory card.” | z There are no image data saved on the memory card that can be read by this | |
| machine. | |
| z The machine may not recognize the file if the file name or the folder path | |
| contains certain characters. Use only alphanumeric characters. | |
| z Photo data edited or processed on a computer must be printed from the | |
| computer. | |
“The following ink may have run out. | If the lamp on the ink tank is flashing, ink may have run out. | |
Replacing the ink tank is | Replacing the ink tank is recommended. | |
recommended.” | If printing is in progress and you want to continue printing, press the OK button | |
U041 | ||
with the ink tank installed. Then printing can continue. Replacing the ink tank is | ||
| recommended after the printing. The machine may be damaged if printing is | |
| continued under the ink out condition. | |
|
| Note |
| If multiple ink lamps are flashing red, see “Getting the Ink Status Information” on |
| page 50 and check the status of each ink tank. |
“The following ink has run out. Replace | Ink has run out. (The lamp on the ink tank flashes.) |
the ink tank.” | Replace the ink tank and close the Scanning Unit (Printer Cover). |
U163 | Printing under the current condition may damage the machine. |
| If you want to continue printing in this condition, you need to release the function |
| for detecting the remaining ink level. Press and hold the Stop/Reset button for |
| at least 5 seconds, and then release it. |
| With this operation, releasing the function for detecting the remaining ink level is |
| memorized. Please be advised that Canon shall not be liable for any |
| malfunction or trouble which may be caused by continuation of printing under |
| the ink out condition. |
|
| Note |
| If the function for detecting the remaining ink level is disabled, the ink tank in |
| gray is displayed in the remaining ink volume screen on the LCD. |
| |
“Print head is not installed. Install the | Follow the directions given in your setup sheet to install the Print Head. |
print head.” | If the Print Head is already installed, remove the Print Head once and then |
U051 | reinstall it. |
“The type of print head is incorrect. | If the error is not resolved, the Print Head may be damaged. Contact your |
Install the correct print head.” | Canon service representative. |
U052 |
|
“Inner cover is open. Close the inner | If the Inner Cover is open when starting printing, close it and then press the OK |
cover and press OK.” | button on the machine. |
| Do not open or close the Inner Cover while printing, as this can damage the |
| machine. |
“Some ink tanks are not installed in | Possible causes are as follows: |
place.” | z Some ink tanks are not installed in the correct position. (The lamp on the ink |
U072 | tank flashes.) |
“More than one ink tank of the following | z More than one ink tanks of the same color are installed. (The lamp on the ink |
color is installed.” | tank flashes.) |
U071 | Confirm that the ink tanks are installed in the appropriate positions. |
|
74Troubleshooting