Using Headphones during Recording
The headphones terminal also serves as AV terminal. Headphones can only be used when "H" is displayed on the screen. If not, change the setting following the
procedure below.
CAMERA | PLAY (VCR) |
CARD CAMERA | CARD PLAY |
(
38)
VCR SETUP
AV/PHONES 
••AV
Open the menu and select [VCR SETUP]. Select [AV/PHONES H], set it to [PHONES H ] and close the menu.
Adjusting the Headphone Volume
CAMERA | PLAY (VCR) |
CARD CAMERA | CARD PLAY |
(
38)
AUDIO SETUP
HVOLUME••••• |
Open the menu and select [AUDIO SETUP]. Select [ H VOLUME], adjust the volume with the SET dial and close the menu.
You can turn off the volume completely by turning the SET dial down until [OFF] appears.
Turn the SET dial up to increase the volume again.
60
