61
Using the Mode Dial
1Use the W or X button to select (Color
Swap) ISO button.
zThe camera will switch to color input
mode, and the displa y will alternate
between the original image and the
color swap image (usi ng the
previously set color).
2Aim the camera so that the color you wish to
change appears at the center of the LCD
monitor (or viewfinder) and press the W
button.
zOnly one color can be specified.
z
You can use the S or T button to specify the range of the
colors that are retained.
-5: Only takes the color that you want to change.
+5: Also takes colors close to the one that you want to change.
3Aim the camera so that the desired color
appears at the center of the LCD monitor (or
viewfinder) and press the X button.
zOnly one color can be specified.
4Complete the setting with the ISO button,
and shoot.
zWhen you press the Movie button, you can shoot movies in
Color Swap mode.
z
The default setting for Color Swap changes green int o white.
zYou may not obtain the expected results after color input
mode if you use the flas h.
zThe colors specified in the Colo r Swap mode are retained
even if the camera’s power is tur ned off.