PROJECTING AN IMAGE FROM THE COMPUTER
Setting up the Power Management Function
If the projector receives no signal input within 30 seconds, a countdown timer appears. The lamp will turn off five minutes later and the projector will enter the power management mode selected in advance.
You can select one of the following power management modes from the menu. (P70)
Ready mode
Select this mode to start projection immediately.
When the projector enters this mode, the lamp is turned off and its cooling starts. When the lamp has been cooled down, the [POWER] indicator starts flashing red and green to enter the ready status. Projection will restart if the input signal is reconnected or any button on the top control or remote control is pressed.
Shutdown mode
Select this mode to turn off the projector automatically.
When the projector enters this mode, the lamp is turned off and its cooling starts. When the lamp has been cooled down, the [POWER] indicator stops flashing red and stays lit and the power is turned off.
When the lamp is being cooled in a power management mode (for 90 seconds), the projector is inoperative.
The power management function can be disabled (OFF).
36
