Canon SX20 manual Input Terminals on Main Unit, Video in terminal P42 Service Port jack

Input Terminals on Main Unit

1 2 3 4 5 6 7

BEFORE USE

9	8
1 S-VIDEO IN terminal (P42)		5 SERVICE PORT jack
Receives an S-VIDEO signal from AV		Exclusively used by the service personnel (it
equipment.		is not used normally).

2VIDEO IN terminal (P42)

Receives a composite video signal from AV equipment.

3DVI-I/RGB IN-1 terminal (P23, 42) Receives a digital or analog RGB signal from the computer (DVI terminal).

4RGB IN-2/COMPONENT IN/RGB OUT terminal (P23, 42)

Receives an analog RGB signal from the computer or receives a component picture signal from AV equipment (mini D-sub 15-pin terminal).

Also used to output an analog RGB signal by selecting an option from the menu.

6USB terminal (P41)

Connected to the computer with a USB cable when the remote control is used as the mouse of the computer.

7AUDIO IN terminal (P24, 43)

Receives an audio signal (stereo) from the computer or AV equipment.

8 Power cord socket (P26)

9Antitheft lock hole

Allows you to connect an antitheft cable.

19