Canon SX20 manual Adjusting the Total Number of Dots Tracking

Adjusting the Total	Adjusting the
Number of Dots	Tracking

Adjust the total number of horizontal dots.

Adjust the tracking when the projected image flickers due to a tracking error.

Display settings

Input signal settings

Total dots

Display settings

Input signal settings

Tracking

>	Increase the total number of dots.
< Reduce the total number of dots.

This adjustment is required when the auto PC adjustment cannot project images correctly.

>

<

Increases the set value.

Decreases the set value.

•	This adjustment is required when				SETTING
	the auto PC adjustment cannot
	project images correctly.
•	The setting	is recorded	for	the	UP
	[ANALOG	RGB-1] signal		and
					FUNCTIONSUSINGMENUS
	[ANALOG	RGB-2]	signal

separately.

53