Replacing the Lamp
When the time of use of the lamp is 1400 hours or longer, the following message (two types) is displayed for 10 seconds each time the projector is turned on.
• When the time of use is 1,400 to 1,500 hours
• When the time of use is 1,500 hours or longer
• This message will not appear again, if you select [No] in response to the 
message "Do you want to display this message again?".
•Check the time of use of the lamp in [Lamp counter] from the System settings menu. (P74)
• When replacing the lamp, turn off the projector, wait until the cooling fan stops, remove the power plug from the AC outlet, and let the projector stand
Caution for at least 1 hour. You may get burned because the main unit is very hot immediately after the projector is turned off.
•When replacing the lamp do not touch the inner glass surface. The projector’s performance may degrade.
About the Replacement Lamp
This projector uses the following lamp.
Lamp type No. :
Be sure to use the lamp of the specified type.
A lamp can be ordered from your dealer. |
MAINTENANCE
77
