Canon SX20 manual Procedure for Replacing the Lamp, Handle, and remove the lamp, Screw

Procedure for Replacing the Lamp

1

2

3

4

Turn off the projector and disconnect the power plug from the AC outlet. Allow the projector to cool for a least 1 hour.

Detach the lamp cover by loosening	Lamp cover	Screw
a screw with a flathead screwdriver.

Loosen two screws, turn up the	Handle	Lamp
handle, and remove the lamp.

Insert a new lamp as far as it will go and secure it with two screws.

* After installation, be sure to turn down the handle.

Screws

MAINTENANCE

78

5

6

7

8

Install the lamp cover and tighten the	Lamp cover
screw.

Turn on the projector.

Bring up the menu and select [System settings] -> [Lamp counter]. (P74)

Select [Reset] -> [OK] to reset the lamp counter.