Canon SX20 manual Wide Screen VIDEO, S-VIDEO and Component input only, Auto Component input only

Adjusting the Image

The image adjustment method is the same as that used when the projector is connected to a computer. Lets take a look at only the topics specific to AV equipment.

For other image adjustment methods, see P30.

Selecting a Screen Mode

You can select one of three screen modes depending on your AV equipment, specifications of playback software, etc.

• A screen mode can be selected by selecting “Screen settings” from the menu. (58)

Normal (VIDEO, S-VIDEO and COM-	4:3
PONENT input only)
Select this if you want to project an image
at a 4:3 aspect ratio (W:H).

PROJECTING AN IMAGE FROM AV

Wide Screen (VIDEO, S-VIDEO and COMPONENT input only)

Select this if you want to project an image at a 16:9 aspect ratio (W:H).

For wide screen sizes, see the

table on 85.

Auto (COMPONENT input only)

To switch between [Normal] and [Wide Screen] automatically depending on the image from the AV equipment, select [Auto].

16:9

EQUIPMENT

• The upper, lower, left, and/or right portions of a projected image may be missing depending on the selected display mode

•When DIGITAL RGB or ANALOG RGB-1 is selected as the input signal type, the display mode is the same as that used when the projector is connected to the computer. (P33)

48