![](/images/new-backgrounds/1169083/169083103x1.webp)
SETTING UP FUNCTIONS USING MENUS
Display Settings Menu
Make various settings related to input signals of the computer and AV equipment as well as the settings related to display.
Performing the auto pc | [Auto pc adj.] | P52 |
adjustment |
|
|
Adjusting the total | [Total dots] | P53 |
number of dots |
|
|
Adjusting the tracking | [Tracking] | P53 |
Adjusting the | [Horizontal position] | P54 |
horizontal position |
|
|
Adjusting the vertical | [Vertical position] | P54 |
position |
|
|
Adjusting the number | [Horizontal pixels] | P55 |
of horizontal pixels |
|
|
Adjusting the number | [Vertical pixels] | P55 |
of vertical pixels |
|
|
Selecting an input | [Input signal select] .... | P56, 57 |
signal type |
|
|
Selecting a Screen mode | [Screen settings] | P57, 58 |
Selecting a menu | [Menu position] | P58 |
position |
|
|
Capturing a logo to be | [Logo capture] | P59 |
displayed |
|
|
Selecting a logo | [Logo position] | P59 |
display position |
|
|
Displaying a logo | [No signal screen] | P60 |
(No signal input) |
|
|
Displaying a logo | [No show screen] | P60 |
(No Show) |
|
|
Displaying a logo | [Projector on] | P61 |
(Projector on) |
|
|
When | [Image flip H/V] | P61 |
or for Rear Projection |
|
|
Performing the Auto
PC Adjustment
The projector automatically detects the input signal (ANALOG RGB) from the connected computer to make the optimum settings for the total number of dots, tracking, and so on.
Display settings
Auto PC Adj.
OK | Perform the auto PC adjust- |
| ment function. |
• Most computers can project an
image optimally using an auto PC function.
•Signal types supported by the computers that can use the auto PC function are listed in the table on page 84.
•If an image cannot be projected correctly even with the auto PC function, manually specify the parameters ([Total dots] to [Verti- cal pixels]) for the next item [Input signal settings]. (P53 to P55)
52