Canon SX20 manual Installing the Lens Cap, Optional Parts

Installing the Lens Cap

Install the lens cap in the following manner:

Pass the supplied string through the lens cap string hole on the bottom of the projector, and then pass the other end of the string in the hole on the lens cap.

Optional Parts

• Lamp	Part No.: RS-LP01
• Ceiling Attachment	Part No.: RS-CL01
• Ceiling Pipe (360 mm / 14.2″)	Part No.: RS-CL03*
• Ceiling Pipe (550 mm / 21.7″)	Part No.: RS-CL04*
• Ceiling Pipe (760 mm / 29.9″)	Part No.: RS-CL05*
• Ceiling Plate	Part No.: RS-CL02**
• Mac Adapter	Part No.: LV-AD02
• DVI Cable	Part No.: LV-CA29

* This part is used to hang the projector from a high ceiling.

** This part is used to join the ceiling pipe and the ceiling attachment.

For more information, refer to the instruction manual that comes with the ceiling attachment RS-CL01.

APPENDIX

92