Capresso Impressa J5 warranty Optional Cleaning Cycles, DESCALE, EXIT, Rinse

Display	Function/Comment	Chapter
HARDNESS	Set the water hardness level to the water you	16.1
	are using. The machine will then automatically
	remind you when it’s time to de-scale the
	machine. If the CLEARYL water filter is
	installed, this program will not show up.
ENERGY	You can choose an energy savings mode. The	17.3
	machine will lower the temperature in stand by.
TIME	Set the time. Once the time is set, you can	17.4
	program an auto-on time (see UNIT-ON).
UNIT-ON	If the actual time is set, you can program an	17.5
	AUTO-ON time
OFF AFTER	The machine is set to turn off after 2 hours after	17.6
	last use. You can change this to other intervals.
	You can check how many cups of coffee you	17.7
INFO	made, total and by beverage button. You can
	also check the number of tablet cleaning cycles,
	decalcifying cycles, and Clearyl filters used.
DISPLAY	You can choose the volume display in metric
	(ML = milliliters) or in non-metric (OZ = ounces);	17.8
	you can also choose the time format for TIME
	on UNIT-ON in AM/PM or 24 HRS (military time).
LANGUAGE	Change the display from English to French,	17.9
	Italian, Dutch (NL) or German.
EXIT	Push the Rotary button. This brings you back
	to READY to make coffee again.

17.1 OPTIONAL CLEANING CYCLES

The J5 has built-in maintenance programs which automatically remind you when it is time to perform them. You can also choose to perform these programs outside the programmed cycles. This comes handy if you have not used the machine for a long time or for reasons mentioned below.

To access these maintenance programs outside the built-in cycles, proceed as follows:

READY

•Push and hold the Rotary Dial until the display shows RINSE.

•Push the Rotary Dial, the display shows RINSE. Turn the dial

and the display will show the following options: CLEAN,

DESCALE, EXIT, RINSE,

Please note: If you do not take action at that time, the display will go back automatically to READY.

Please note: If the Clearyl Filter is activated, the above sequence will read RINSE, CLEAN, FILTER, EXIT. Example for an additional RINSE cycle:

•Place a cup underneath the coffee spouts. READY.

•Push and hold the Rotary Dial until the display shows RINSE.

•Push the Rotary Dial, the display shows RINSE. Push the rotary dial again. RINSING. The machine will run a 15 second

hot water rinse cycle and return to READY.

Example for an additional Tablet Cleaning Cycle:

See chapter 18.2.

17.2RE-PROGRAMMING ALL BEVERAGE BUTTONS All six beverage buttons have factory settings (chapter 5). You can override certain settings for just one cup (see chapter 11.1). Overriding does not change the programmed setting for the next use.

24.