Capresso Impressa J5 Ready, Setting The Time, Setting The Auto-On Time / Unit On, Recommendations

READY,

•Push and hold the Rotary Dial until the display shows RINSE.

•Turn the dial clockwise until the display shows ENERGY –.

•Push the rotary dial. The display shows SAVE –

•Turn the dial until the display shows SAVE ✓.

•Push the rotary dial. For two seconds the display shows OK and then ENERGY ✓.

•Turn the rotary until the display shows EXIT.

•Push the rotary dial. READY.

17.4 SETTING THE TIME

Setting the time lets you set an auto-on time (chapter 17.5).

READY,

•Push and hold the rotary dial until the display shows RINSE.

•Turn the dial clockwise until the display shows TIME

•Push the rotary dial. The display shows –:–Turn the dial to set the hour and push the dial to confirm the hour setting.

•Turn the dial to set the minutes and push to confirm For two seconds the display shows OK and then TIME.

•Turn the rotary until the display shows EXIT.

•Push the rotary dial. READY.

Please note: If you turn the machine off with the main power switch (Fig. 1a) or if you unplug the machine or experience a power outage, the actual time will not be retained. The next time you turn the machine on, the display will first show TIME –:– . Turn the Rotary dial to set the hours, then push the Rotary dial. Turn the Rotary dial again to set the minutes and push to confirm. Now the AUTO-ONtime will be automatically restored (see next chapter).

17.5 SETTING THE AUTO-ON TIME / UNIT ON

You can set a time at which the machine turns itself on. This way you don’t have to wait for the machine to warm up. At the pro- grammed time the J5 turns itself on, it will start heating and the display will then show RINSE. Just push the Rinse button and within seconds you can brew your first cup of coffee.

Please note: Auto-on will only work if you set the actual time and the main power switch is turned on (when the small red light in the On/Off switch is illuminated, you know that the main power is on).

Setting the time allows you to program an auto-on time.

READY,

•Push and hold the rotary dial until the display shows RINSE.

•Turn the dial clockwise until the display shows UNIT ON.

•Push the rotary dial. The display shows –:–

•Turn the dial to set the hour and push the dial to confirm the hour setting.

•Turn the dial to set the minutes and push to confirm For two seconds the display shows OK and then UNIT ON.

•Turn the rotary until the display shows EXIT.

•Push the rotary dial. READY.

17.6CHANGING THE AUTO-OFF SETTING / OFF AFTER Your machine is pre-set to turn itself off 2 hours after last use. You can set the Auto-Off from .5 hour to 15 hours or you can set it to INACTIVE. In this case the machine will not turn itself off automatically.

Recommendations:

• If you use the machine only in the morning, leave the auto-off at 2 hours.

26.