Carrier 30XW325-400 manual Dimensions, a30-4745, 30XW UNIT DIMENSIONS, Suction End, Discharge End

Dimensions

30XW UNIT DIMENSIONS

a30-4745

SEE NIH EVAPORATOR

DETAIL FOR NOZZLE

MEASUREMENTS

SUCTION

END

SEE NIH CONDENSER

DETAIL FOR NOZZLE

MEASUREMENTS

EVAPORATOR

CONDENSER

MLV (OPTIONAL) MLV (OPTIONAL)

DISCHARGE END

STANDARD 30XW UNIT DIMENSIONS

30XW UNIT	OPERATING	MOUNTING LOCATION WEIGHT, lb [kg]					DIMENSIONS (ft-in. [mm])
SIZE	WEIGHT, lb [kg]	1	2	3	4		A		B		C
325	14,319 [6495]	3734 [1694]	3828 [1736]	3337 [1514]	3420 [1551]	6-3/8	[1837]	6-3/8	[1837]	3/8	[9.53]
350	14,515 [6584]	3785 [1717]	3880 [1760]	3383 [1535]	3467 [1573]	6-3/8	[1837]	6-3/8	[1837]	3/8	[9.53]
400	14,759 [6695]	3848 [1745]	3946 [1790]	3439 [1560]	3526 [1599]	6-3/8	[1837]	6-3/8	[1837]	3/8	[9.53]

NOTES:

1.Weights shown for standard chiller (2 pass with NIH, victaulic waterboxes).

2.See page 14 for unit mounting locations.

30XW UNIT AND WATERBOX DIMENSIONS

LEGEND

MLV — Minimum Load Valve

MWB — Marine Waterbox

NIH — Nozzle-In-Head

SSV — Suction Service Valve

CONNECTIONS	PASSES	WATERBOX	NOZZLE	D	E	F		MAX UNIT OPERATING WEIGHT lb [kg]
		(EVAP/COND)	TYPE	ft-in. [mm]	ft-in. [mm]	ft-in. [mm]		325	350	400
		NIH/NIH	Victaulic	13-33/4[4057]				14,319 [6495]	14,515 [6495]	14,759 [6695]
			Flange	13-91/16[4193]				14,651 [6646]	14,847 [6646]	15,091 [6845]
		NIH/MWB	Victaulic					14,498 [6576]	14,694 [6576]	14,938 [6776]
Same Ends			Flange		3-113/8[1210]	6-611/16	[1999]	14,739 [6685]	14,935 [6685]	15,179 [6885]
		MWB/NIH	Victaulic	13-115/8[4258]				14,489 [6572]	14,685 [6572]	14,929 [6772]
			Flange					14,746 [6689]	14,768 [6689]	15,012 [6809]
		MWB/MWB	Victaulic					14,668 [6653]	14,864 [6653]	15,108 [6853]
	2 Pass		Flange					14,834 [6729]	15,030 [6729]	15,274 [6928]
		NIH/NIH	Victaulic	13-65/16[4123]				14,319 [6495]	14,515 [6495]	14,759 [6695]
			Flange	14-47/16[4380]				14,651 [6646]	14,847 [6646]	15,091 [6845]
		NIH/MWB	Victaulic	14-23/16[4323]				14,498 [6576]	14,694 [6576]	14,938 [6776]
			Flange	14-615/16[4443]				14,739 [6685]	14,935 [6685]	15,179 [6885]
		MWB/NIH	Victaulic	14-213/16[4339]				14,489 [6572]	14,685 [6572]	14,929 [6772]
Opposite Ends			Flange	14-83/16[4475]	3-113/8[1210]	6-611/16	[1999]	14,746 [6689]	14,768 [6689]	15,012 [6809]
		MWB/MWB	Victaulic	14-1011/16[4539]				14,668 [6653]	14,864 [6653]	15,108 [6853]
			Flange					14,834 [6729]	15,030 [6729]	15,274 [6928]
		NIH/NIH	Flange	14-55/8[4410]				14,828 [6726]	15,024 [6726]	15,268 [6925]
	1 or	NIH/MWB	Flange					15,223 [6905]	14,768 [6896]	15,012 [6809]
	3 Pass	MWB/NIH	Flange	14-1011/16[4539]				15,244 [6915]	15,440 [6894]	15,684 [7114]
		MWB/MWB	Flange					15,581 [7067]	15,777 [7063]	16,021 [7267]

NOTES:

1.Operating weight includes weight of water, refrigerent, and oil.

2. Denotes center of gravity.

3.Dimensions shown in ft-in. [mm] unless noted.

4.The recommended service clearance around the machine is 3 ft [914.4 mm].

5.Victaulic nozzles are standard on all units. A flow switch can be factory-installed in evaporator inlet victaulic nozzle.

6.Maximum fluid side pressure of condenser or evaporator is 150 psig [1034 kPa] (standard) or 300 psig [2068 kPa] (optional).

7.Operating weight includes weight of water, refrigerant, and oil.

12