Carrier 40RMQ K Ð Medium-StaticDrive Data, 50 Hz Ð SI, L Ð High-StaticDrive Data, 50 Hz Ð SI

Table 9K Ð Medium-Static Drive Data, 50 Hz Ð SI

		40RM		40RM	40RM			40RM	40RM	40RM	40RM
	40RM	40RMQ	40RMS	40RMQ			40RMQ
UNIT					40RMS				40RMS	40RMS	40RMS
	007	40RMS	010	40RMS			40RMS
					014				024	028	034
		008		012				016
MOTOR DRIVE
Motor Pulley Pitch Diameter	86.4-	86.4-	86.4-	86.4-	86.4-			94.0-	101.6-	109.2-	109.2-
(mm)	111.8	111.8	111.8	111.8	111.8			119.4	127.0	134.6	134.6
Pulley Factory Setting	2.5	2.5	2.5	2.5	2.5			3.0	2.5	3.0	3.0
Full Turns Open
FAN DRIVE
Pulley Pitch Dia (mm)	203	178	178	152	191			201	178	239	239
Pulley Bore (mm)	25.4	25.4	25.4	25.4	36.5			36.5	36.5	49.2	49.2
Belt No. Ð Section	1ÐA	1ÐA	1ÐA	1ÐA	1ÐA	1ÐB		2ÐA	2ÐB	2ÐB
Belt Pitch (mm)	1024	1049	1049	947	998			1011	922	1011	1011
FAN SPEEDS (r/s)
Factory Setting	11.6	13.2	13.2	15.4	12.4			12.6	15.3	12.1	12.1
Range	10.1-	11.5-	11.5-	13.5-	10.8-			11.1-	13.6-	10.9-	10.9-
	13.1	14.9	14.9	17.4	13.9			14.1	17.0	13.4	13.4
Max Allowable Speed (r/s)	20.0	20.0	20.0	20.0	20.0			20.0	20.0	18.3	18.3
Change per 1¤2 Turn of
Moveable Motor Pulley	0.297	0.340	0.340	0.395	0.317			0.252	0.340	0.210	0.210
Flange
MAX FULL TURNS FROM	5	5	5	5	5			6	5	6	6
CLOSED POSITION
SHAFTS CENTER DISTANCE	265-313	265-313	265-313	265-313	265-313		232-279		232-279	169-240	169-240
(mm)

Table 9L Ð High-Static Drive Data, 50 Hz Ð SI

		40RM		40RM	40RM			40RM	40RM	40RM	40RM
	40RM	40RMQ	40RMS	40RMQ			40RMQ
UNIT					40RMS				40RMS	40RMS	40RMS
	007	40RMS	010	40RMS			40RMS
					014				024	028	034
		008		012				016
MOTOR DRIVE
Motor Pulley Pitch Diameter	86.4-	86.4-	86.4-	101.6-	86.4-			101.6-	101.6-	109.2-	109.2-
(mm)	111.8	111.8	111.8	127.0	111.8			127.0	127.0	134.6	134.6
Pulley Factory Setting	2.5	2.5	2.5	3.0	2.5			3.0	3.0	3.0	3.0
Full Turns Open
FAN DRIVE
Pulley Pitch Dia (mm)	152	140	140	140	152			178	163	203	218
Pulley Bore (mm)	25.4	25.4	25.4	25.4	36.5			36.5	36.5	49.2	49.2
Belt No. Ð Section	1ÐA	1ÐA	1ÐA	1ÐA	2ÐA	2ÐA		2ÐA	2ÐB	2ÐB
Belt Pitch (mm)	947	947	947	922	922			998	871	935	960
FAN SPEEDS (r/s)
Factory Setting	15.4	16.8	16.8	19.4	15.4			15.3	16.7	14.3	13.3
Range	13.5-	14.7-	14.7-	17.3-	13.5-			13.6-	14.9-	12.8-	11.9-
	17.4	19.0	19.0	20.0*	17.4			17.0	18.6	15.7	14.6
Max Allowable Speed (r/s)	20.0	20.0	20.0	20.0	20.0			20.0	20.0	18.3	18.3
Change per 1¤2 Turn of
Moveable Motor Pulley	0.395	0.432	0.432	0.360	0.395			0.283	0.308	0.247	0.230
Flange
MAX FULL TURNS FROM	5	5	5	6	5			6	6	6	6
CLOSED POSITION
SHAFTS CENTER DISTANCE	265-313	265-313	265-313	234-279	232-279		232-279		207-255	169-240	169-240
(mm)

*It is possible to adjust drive so that fan speed exceeds maximum allowable. DO NOT exceed 20 r/s.

33