Carrier 50HE003-006, 50HJ004 installation instructions Physical Data 50HE, Base Unit 50HE

50HE,HJ

Table 2—Physical Data 50HE

BASE UNIT 50HE		003	004		005		006
NOMINAL CAPACITY		2	3		4		5
OPERATING WEIGHT (lb)
Unit		435	445		465		635
Humidi-MiZer™Adaptive Dehumidification System		13	15		23		25
EconoMi$er IV		50	50		50		50
Roof Curb		115	115		115		115
COMPRESSOR					Scroll
Quantity		1	1		1		1
Oil (oz)		25	42		56		53
REFRIGERANT TYPE					R-22
Expansion Device				Acutrol™ Metering Device
Operating Charge (lb-oz)
Standard Unit		5---3	7---11		8---8		12---11
Unit With Humidi-Mizer Adaptive Dehumidification System		10---2	14---0		14---13		21---0
CONDENSER FAN					Propeller
Quantity...Diameter (in.)		1...22	1...22		1...22		1...22
Nominal Cfm		3000	3500		3500		4100
Motor Hp...Rpm		1/8...825	1/8...825		1/8...825		1/ ...1100
Watts Input (Total)							4
		180	180		180		320
CONDENSER COIL			Enhanced Copper Tubes, Aluminum Lanced Fins
Rows...Fins/in.		1...17	1...17		2...17		2...17
Total Face Area (sq ft)		14.6	14.6		16.5		16.5
EVAPORATOR COIL			Enhanced Copper Tubes, Aluminum Double-Wavy Fins
Standard Unit
Rows...Fins/in.		2...15	2...15		2...15		4...15
Total Face Area (sq ft)		4.2	5.5		5.5		5.5
Unit with Humidi-Mizer Adaptive Dehumidification System
Rows...Fins/in.		1...17	1...17		2...17		2...17
Total Face Area (sq ft)		3.5	3.9		3.9		3.9
EVAPORATOR FAN				Centrifugal Type, Belt Drive
Quantity...Size (in.)		1...10 x 10	1...10 x 10		1...10 x 10		1...10 x 10
Nominal Cfm	Std	800	1200		1600		2000
Maximum Continuous Bhp		0.58	1.20		1.20		1.30/2.40*
	Hi-Static		2.40		2.40		2.90
Motor Frame Size	Std	48	48		48		48/56*
Motor Rpm	Hi-Static		56		56		56
	Std	1620	1620		1620		1725
Fan Rpm Range		400-1000	680-1044		770-1185		1035-1460
Motor Bearing Type	Hi-Static		1075-1455		1075-1455		1300-1685
		Ball	Ball		Ball		Ball
Maximum Fan Rpm	Std	1620	2100		2100		2100
Motor Pulley Pitch Diameter A/B (in.)		2.4/3.2	1.9/2.9		1.9/2.0		2.4/3.4
	Hi-Static		2.8/3.8		2.8/3.8		3.4/4.4
Nominal Motor Shaft Diameter (in.)	Std	5/8	1/2		1/2		5/8
	Hi-Static	7/8	5/8		5/8		5/8
Fan Pulley Pitch Diameter (in.)	Std	4.0	4.5		4.0		4.0
	Hi-Static	4.5	4.5		4.0		4.5
Belt — Type...Length (in.)	Std	1...A...36	1...A...36		1...A...36		1....4...40
Pulley Center Line Distance (in.)	Hi-Static		1...A...39		1...A...39		1...A...40
	Std	10.0---12.4	10.0-12.4		10.0-12.4		14.7-15.5
Speed Change per Full Turn of		60	65		70		75
Movable Pulley Flange (rpm)	Hi-Static		65		65		60
Movable Pulley Maximum Full	Std	5	5		5		6
Turns from Closed Position	Hi-Static		6		6		5
Factory Setting — Full Turns Open	Std	3	3		3		3
	Hi-Static		31/2		31/2		31/2
Factory Speed Setting (rpm)	Std	756	826		936		1248
Fan Shaft Diameter at Pulley (in.)	Hi-Static		1233		1233		1396
		5/8	5/8		5/8		5/8
HIGH-PRESSURE SWITCH (psig)
Standard Compressor Internal Relief				450 ± 50
Cutout				428
Reset (Auto.)				320
LOSS-OF-CHARGE/LOW-PRESSURE
SWITCH (Liquid LIne) (psig)
Cutout				7 ± 3
Reset (Auto.)				22 ± 5
FREEZE PROTECTION THERMOSTAT
Opens (F)				30
Closes (F)				45
OUTDOOR-AIR INLET SCREENS			Cleanable. Screen quantity and size varies with option selected.
RETURN-AIR FILTERS					Throwaway
Quantity...Size (in.)				2...16 x 25 x 2
LEGEND			***These units do NOT meet the California low NOx requirements.
Bhp — Brake Horsepower			†††California SCAQMD compliant low NOx			models have combustion products that are
			controlled to 40 nanograms per joule or less.

*Single phase/three phase.

10