Carrier Access Adit 3500 Rack Mounting

10 Adit 3500 - Release 1.6

Quick Start Guide

Installation

Rack Mounting

This is an Optional Feature.

NOTE: Rack mounting kits are available for both 19 and 23 inch racks. 1 Rack Unit (RU) of spacing

is required above the Adit 3000 in the Rack Mount Unit.

To rack mount the Adit 3000, follow the instructions below:

1. Attach bracket ears to Rack Mounting Tray using four #10-32 x 1/4" screws on each side. The

Mounting Ears can be used for both a 19 or 23 inch rack. The drawing below shows a top view

of the 2 versions.

2. Attach the Rack Mounting Tray assembly (with mounting ears attached) to rack, using four

#10-32 x 1/4” screws (two on each mounting ear).

3. Remove wall mount and screws, if attached, from Adit 3500 unit.

Note: Adit 3500 and wall mounting bracket are not assembled from the factory.

23 in rack

19 in rack

Front

screws

Rack Mount Tray

Mounting Ear

Rack Mounting Tray

Contents

Main Page QUICK START GUIDE Unpacking and Inspection WARNING! Electrostatic Discharge (ESD) Precautions WARNING! Quick Start Guide Installation Environment WARNING! User Safety CAUTION! Installation WARNING! Quick Start Guide Compliant Installation NOTE: WARNING! Ferrite Beads Ferrite beads shipped with Adit chassis: Quick Start Guide Wall Mounting NOTE: Rack Mounting Page Battery Backup Quick Start Guide #1 Adit 3500 mounted on top of the Battery Backup Page Quick Start Guide #2 Adit 3500 and Battery Backup mounted to the wall Front Adit 3500 Battery Backup Chassis Overview Pinout Back Front Quick Start Guide Interface Connectors Front of Adit Back of Adit Grounding the Unit WARNING! 12 VAC Power Connection Battery Connection Quick Start Guide DS1/E1 Connection Ports 18 DS1/E1 RJ-48C 10/100Base-TX Ethernet Ethernet (RJ-45) 18 RS-232 Craft Port (Female DB-9) RJ-11 Connector Reset Button Alarm/Status LEDs LED State Description Quick Start Guide Web-Based Management To access the management console: NOTE: WARNING! Setting up a CLI Connection NOTE: Quick Start Guide Log in NOTE: Key Enabled Software Features NOTE: 26 Adit 3500 - Release 1.6 This information is also displayed with the following CLI command: Basic Configuration Setup Adit 3500 for access via Web-Browser Restore Factory Defaults Modify Default Admin User Page Configure WAN Interface for Internet Connectivity