
Basic Operations
Digital Sampling
A number of the tones that are available with this keyboard have been recorded and processed using a technique called digital sampling. To ensure a high level of tonal quality, samples are taken in the low, mid, and high ranges and then combined to provide you with sounds that are amazingly close to the originals. You may notice very slight differences in volume or sound quality for some tones when you play them at different positions on the keyboard. This is an unavoidable result of multiple sampling, and it is not a sign of malfunction.
Changing Tones and Configuring DSP Effect Settings
This keyboard has only a single DSP sound source. Because of this, selecting tones for which DSP is enabled for multiple parts when layering or splitting tones (page
DSP line is a parameter that controls whether or not the currently selected DSP effect is applied to a part.* Each tone has a DSP line parameter. Selecting a tone for a part applies the tone’s DSP line parameter setting to all parts.
*The DSP line parameter is turned on (DSP effect is applied) for the 300 Advanced Tones numbered 000 through 299, and turned off (DSP effect not applied) for the 200 preset tones from 300 to 499. For information about other tones, see “Tone Types” on page
To optimize keyboard settings for piano play 1. Press the PIANO SETTING button.
2. Now try playing something on the keyboard.
The notes you play will sound with a piano tone.
3.If you want to play with rhythm accompaniment, press the START/STOP button.
This causes a rhythm that is optimized for piano will start to play.
To stop rhythm play, press the START/STOP button again.
Pressing the PIANO SETTING button while a rhythm is playing stops rhythm play and then changes the keyboard setup.
Pressing the PIANO SETTING button while the keyboard is in the Synthesizer Mode or other mode exits the current mode and then changes the keyboard setup.
The setup of the keyboard does not change if you press the PIANO SETTING button when any one of the following exists.
*During
*While the data save or overwrite message is on the display
*During a registration data save operation
PIANO SETTING Button
Pressing this button changes the setup of the keyboard to optimize it for piano play.
Settings
Tone number: | “000 St.GrPno” |
Rhythm number: | “120 Pf Bld 1” |
Accompaniment Mode: | Normal |
Layer: | Off |
Split: | Off |
Auto Harmonize: | Off |
Transpose: | 0 |
Touch Response: | Off: Returns to initial default |
| On: No change |
Assignable Jack: | SUS |
Local Control: | On |
Mixer Channel 1 Parameter | Depends on tone |
Setup: |
|