Casio CTK-691 To edit a drawbar organ tone, Editing Synthesizer Mode Parameters and DSP Parameters of Drawbar Organ Tones, To select a drawbar organ tone

CTK691E01-01.book 23 ページ ２００３年９月２９日 月曜日 午後４時４７分

Using the Drawbar Organ Mode

	�� There are a total of 13 parameters. You can use
To select a drawbar organ tone
	the [	] and [	] CURSOR buttons to cycle
	through them. See “Parameter Details” on page
1. Find the drawbar organ tone you want to use in	E-24 for more information.
	Š While the “More?” screen is on the display, you
the tone list and note its tone number.	can advance to the synthesizer and DSP effect
2. Press the DRAWBAR ORGAN button.	editing screens by pressing the [ ] CURSOR
	button or the [+] button.
Š This causes the drawbar organ tone selection	3. Use the [	] and [	] CURSOR buttons or the
screen to appear.

[+] and [–] buttons to change the setting of the currently displayed parameter.

1 Tone Number

2 Tone Name

3.Use the number buttons to input the three digit tone number for the tone you want to select.

ŠAlways input all three digits for the tone number, including leading zeros (if any).

ŠYou can also increment the displayed tone number by pressing [+] and decrement it by pressing [–].

To edit a drawbar organ tone

1. Select the drawbar organ tone (000 to 049, 100 to 199) you want to edit.

2. Use the [ ] and [ ] CURSOR buttons to display the drawbar organ tone editing screen. Select the parameter whose setting you want to change.

Example:

Selecting the “Ft16’” parameter

ŠYou can also change a parameter setting by entering a value with the number buttons.

ŠYou can monitor the changes in a tone by playing notes on the keyboard as you adjust parameter settings.

ŠSelecting a different tone after you edit parameters replaces parameter settings with those of the newly selected tone.

ŠIf you have drawbar organ tones assigned to more than one channel, changing the drawbar organ tone setting for one of the channels causes the same setting to be applied to all of the other channels as well.

ŠSee “To save an edited drawbar organ tone” on page E-25 for information about saving your edits.

Editing Synthesizer Mode Parameters and DSP Parameters of Drawbar Organ Tones

As with standard (non-drawbar) tones, you can edit the Synthesizer Mode parameters and DSP parameters of drawbar organ tones (See “Drawbar Organ Mode Operational Flow” on page E-22).

1. Use the [ ] and [ ] CURSOR buttons to display “More?”, and then press the [ ] CURSOR button.

ŠThis enters the Synthesizer Mode, which is indicated by the pointer next to SYNTH on the display screen.

ŠFor the remainder of this procedure, perform the steps starting from step 3 under “Creating a User Tone” on page E-47.

1Parameter Setting

2 Parameter Name

705A-E-025A E-23