
Song Memory Function
|
| 3. Specify a tone number. | |
Track Contents After | |||
Pressing a TONE button or the DRAWBAR | |||
|
| ORGAN button displays the tone number and | |
In addition to keyboard notes, the following data is also | name on the display. You can then use the | ||
recorded to the selected track during | number buttons, or the [+] (increase) and | ||
This data is applied whenever the track is played back. | (decrease) buttons to change the tone. | ||
| Tone number | After changing the tone number, press any | |
| Optional pedal operations | keyboard key to clear the tone number and name |
screen, and return to the note input screen.
The following data is recorded in the header whenever you start a recording of a track.
Mixer settings of other tracks
Effect type
Accompaniment volume
Reverb Level
Chorus Level
DSP Hold On/Off
Mixer Hold On/Off
To record to Tracks 2 through 6 using step recording
4. Use the keyboard keys to input notes, or the [0] button to input rests.
At this time, the display shows the keyboard pressure (velocity). Use the [+] (increase) and
You can also input a chord.
5.Use the number buttons to input the length of the note or rest (page
6.Repeat steps 4 and 5 to input more notes.
7.Press the START/STOP button to end recording when you are finished.
This procedure describes how to input notes
1. Press the SONG MEMORY button three times to enter
The song number you select should be the one where you previously input Track 1.
2.Use the SONG MEMORY TRACK buttons to select the track you want to record to (2 through 6).
Example:
Select Track 2.
Use the procedure under “Correcting Mistakes While Step Recording” on page
You can add on to a track that already contains recorded data by selecting that track in step 2 of the above procedure. Doing so automatically locates the step recording start point at the first beat immediately following the previously recorded data.
Whenever you are recording to Tracks 2 through 6, the entire keyboard functions as a melody keyboard, regardless of the current MODE button setting.
Track Contents After Step Recording
In addition to notes and rests, the following data is also recorded to the track during step recording. This data is applied whenever the track is played back.
Tone number
1Flash
|